MUBS-style campus try-out project: starter configuration
=========================================================
Cisco Packet Tracer 8.2.1. Fictional network. Names, VLANs and addresses are invented for practice.
Paste each block into the matching device CLI (enable, then configure terminal).
These blocks do NOT contain LACP, trunks, inter-VLAN routing or load balancing. That is your job.

---------------------------------------------------------
PC ADDRESSING (set under Desktop > IP Configuration)
---------------------------------------------------------
PC-LAB1   10.20.10.21  255.255.255.0  gw 10.20.10.1   MUBS-LAB Fa0/1  VLAN 10
PC-LAB2   10.20.10.22  255.255.255.0  gw 10.20.10.1   MUBS-LAB Fa0/2  VLAN 10
PC-ADM1   10.20.20.21  255.255.255.0  gw 10.20.20.1   MUBS-ADM Fa0/1  VLAN 20
PC-ADM2   10.20.20.22  255.255.255.0  gw 10.20.20.1   MUBS-ADM Fa0/2  VLAN 20
PC-LIB1   10.20.10.31  255.255.255.0  gw 10.20.10.1   MUBS-LIB Fa0/1  VLAN 10
PC-LIB2   10.20.10.32  255.255.255.0  gw 10.20.10.1   MUBS-LIB Fa0/2  VLAN 10
Portal-Srv 10.20.30.10 255.255.255.0  gw 10.20.30.1   MUBS-CORE Fa0/10 VLAN 30

Cabling (FastEthernet members, so each bundle shows about 200 Mbps):
MUBS-CORE Fa0/1  - MUBS-LAB Fa0/23     MUBS-CORE Fa0/2  - MUBS-LAB Fa0/24
MUBS-CORE Fa0/3  - MUBS-ADM Fa0/23     MUBS-CORE Fa0/4  - MUBS-ADM Fa0/24
MUBS-CORE Fa0/5  - MUBS-LIB Fa0/23     MUBS-CORE Fa0/6  - MUBS-LIB Fa0/24

---------------------------------------------------------
MUBS-CORE  (Catalyst 3560-24PS)
---------------------------------------------------------
hostname MUBS-CORE
no ip domain-lookup
enable secret Class123!
banner motd # Authorised use only. Practice network. #
vlan 10
 name ACADEMIC
vlan 20
 name STAFF
vlan 30
 name SERVERS
vlan 99
 name MGMT
vlan 999
 name PARKING
interface FastEthernet0/10
 switchport mode access
 switchport access vlan 30
interface range FastEthernet0/7 - 9 , FastEthernet0/11 - 24 , GigabitEthernet0/1 - 2
 switchport mode access
 switchport access vlan 999
 shutdown
interface Vlan99
 ip address 10.20.99.1 255.255.255.0
 no shutdown
line console 0
 password cisco
 login
 logging synchronous
line vty 0 4
 password cisco
 login
! TODO: ports Fa0/1-6 are left untouched on purpose. Bundle them yourself.
! TODO: VLAN 10, 20 and 30 SVIs and ip routing.

---------------------------------------------------------
MUBS-LAB  (Catalyst 2960-24TT)
---------------------------------------------------------
hostname MUBS-LAB
no ip domain-lookup
enable secret Class123!
banner motd # Authorised use only. Practice network. #
vlan 10
 name ACADEMIC
vlan 20
 name STAFF
vlan 30
 name SERVERS
vlan 99
 name MGMT
vlan 999
 name PARKING
interface range FastEthernet0/1 - 2
 switchport mode access
 switchport access vlan 10
interface range FastEthernet0/3 - 22 , GigabitEthernet0/1 - 2
 switchport mode access
 switchport access vlan 999
 shutdown
interface Vlan99
 ip address 10.20.99.11 255.255.255.0
 no shutdown
ip default-gateway 10.20.99.1
line console 0
 password cisco
 login
 logging synchronous
line vty 0 4
 password cisco
 login
! TODO: Fa0/23-24 are the uplinks. Bundle them yourself.

---------------------------------------------------------
MUBS-ADM  (Catalyst 2960-24TT)
---------------------------------------------------------
Same as MUBS-LAB with these differences:
hostname MUBS-ADM
interface range FastEthernet0/1 - 2
 switchport mode access
 switchport access vlan 20
interface Vlan99
 ip address 10.20.99.12 255.255.255.0

---------------------------------------------------------
MUBS-LIB  (Catalyst 2960-24TT)
---------------------------------------------------------
Same as MUBS-LAB with these differences:
hostname MUBS-LIB
(Fa0/1-2 stay in VLAN 10)
interface Vlan99
 ip address 10.20.99.13 255.255.255.0

---------------------------------------------------------
Save on every switch when you finish a task:
copy running-config startup-config